Table of content
What Are Engine Mounts?
As you already know, the engine mounts are very strong parts that hold the engine of the car in its original place. It stops the engine from shaking too much when you are driving and the car is moving. It also helps the car to reduce noise and keep the engine safe. Sometimes engine mounts are damaged and need to be replaced quickly. If you install new engine mounts in your car, then it will help you to keep the car running smoothly.
Things You Need Before Installing Engine Mounts
Before you start, you have to make sure you have all the tools and safety equipment. Here are the things you need:
- A car jack to lift the car safely.
- Jack stands to hold the car up.
- A wrench and socket set to remove bolts.
- New engine mounts that match your car’s model.
- A piece of wood is to be placed under the engine when lifting it.
- Safety gloves and glasses to protect yourself.
How To Install Engine Mounts? Step-by-Step Guide
Make sure to park the car on a flat surface and turn it off before you start working.
Step 1:
Use the car jack to lift the front of the car. Then, place the jack stands under the car to keep it steady. This will make sure that the car does not move when you are working on it.
Step 2:
Engine mounts are located between the engine and the frame of your car. Most cars have three or four engine mounts. Look at the new engine mounts to see what they look like so you can find them easily in your car.
Step 3:
Before you remove the old engine mounts, you must support the engine. Place a piece of wood on the car jack and slowly lift the engine a little bit. This will keep the engine from dropping when you remove the mounts.
Step 4:
Use your wrench and socket set to remove the bolts that are holding the old engine mounts. Be careful as the bolts might be tight. If they are too hard to remove, then you can use a bit of oil to loosen them. After removing the bolts, take out the old engine mounts.
Step 5:
Take the new engine mounts and place them where the old ones were. Make sure they fit correctly. Then use your wrench to tighten the bolts. Make sure the mounts are secure so the engine stays in place.
Step 6:
Once the new mounts are in place now slowly lower the engine by removing the car jack under it. Make sure the engine sits properly on the new mounts.
Step 7:
Before removing the jack stands, check all the bolts and make sure the engine mounts are tight. If everything looks good, then remove the jack stands and lower the car fully to the ground.
Step 8:
Start the engine and check if the car runs smoothly. If you feel less vibration and no strange noises, then the new engine mounts are working well. Take a short drive to make sure everything feels normal.
Final Thoughts
It seems difficult to install a new engine mount, but if you follow the steps carefully, you can do it safely. Engine mounts keep the engine steady and make driving comfortable. If you are not sure how to install them, then ask a professional mechanic for help. Taking care of your car’s SEJ auto parts engine mounts will help your car last longer and drive better.